Charge phone for 16 hours,   

PRESS and Hold the power button, bottom right, to switch the phone on.

 

BASE RINGER VOLUME      PROG, 7, 1 (off) or 2 (low) or 3 (high) then PROG

KEYPAD TONE             PROG, 4, 1 (off) or 2 (low) or 3 (high) then PROG  

 

HANDSET SPEAKER VOLUME (Earpiece)

During call:   HOLD PROG (2 secs) until Program symbol flashes,

                     Press #   then 1 for lowest or 2 or 3 or 4 for highest

                     Press PROG again.

HANDSET RINGER VOLUME

PROG, 5, 1 for off or 2 for low or 3 for high then PROG  

 

SETTING THE RINGER MELODY       Press PROG 6 , 1 or 2 or 3 then PROG again.

MAKING A CALL   Press PHONE (bottom left) and dial , Press PHONE button to end.

LAST NUMBER REDIAL

The last 4 numbers are kept. Press REDIAL then PHONE button.

Keep pressing redial to select number before pressing PHONE.

 

MEMORIES

Press PROG, Press MEM repeatedly until empty location is found, Enter the phone number and press PROG to store.    (Use UNDO to delete the number if desired.)

 

To dial a memory number, Press MEM, 0 to 9 then PHONE   or Press MEM repeatedly then press PHONE

KEY PAD LOCK

Press PROG #   to disable the keypad, press PROG # again to unlock

P appears in the screen when locked.

REGISTERING / ADDING ADDITIONAL HANDSETS

Hold page button on base until it beeps (10 secs)

Press PROG 9 0 1 PROG   ,   a long number appears , Press PROG , enter the base pin 0000, press PROG then select a handset number 2 to 8 and press PROG.

 

RESETTING HANDSET :     PROG 11590 redial 78 PROG

RESETTING BASE: HOLD page on base for 1 minute until long beep (short beep will sound first). Then register handsets.