TELCOM 810   (FLASH = PROG)

Place handset on charge for 8 hours or more before use.  'charging'  will appear in the screen. The battery symbol only appears when the phone needs recharging.

Press PHONE (Green) to obtain dial tone and PHONE to end, hang up.

--------------------------------------------------------------------------------

R/P   Redial button.
Press R/P then  + / -  to scroll through previously dialled numbers.

MEMORIES Storing
Press FLASH, 2 then a location number 0..9, Enter your phone number 0121  123 4567 Press FLASH.
Use C to delete.

MEMORIES Using
Press MEM then enter location number or use + / - Then PHONE.

INTERCOM
To talk to someone on another handset Press INT followed by the appropriate handset number.  (or * for all)
You may put an outside caller on hold by pressing INT, 1..6 then talk to someone on another handset, then
      Press INT to return to the outside caller,
or  Press PHONE to transfer the call.

MELODY / VOLUME
Press FLASH 3 1   , choose 1 to 3  to alter melody   FLASH ('ring22')  choose 0-2 to alter volume then FLASH

HANDSET LOCK  =   Lock / unlock
FLASH 0  enter PIN (0000) FLASH 

KEY PAD BEEP        FLASH 3 2 FLASH,  1 for ON 0 for OFF.

RESET BASE                                      RESET HANDSET
FLASH 9 enter PIN (0000) 4 FLASH                FLASH 5 1 PIN (0000) FLASH FLASH

REGISTERING HANDSET
Press and hold The Blue page button for 15 seconds,It will blink slowly. If it flashes quickly re-hold the button.
Press FLASH 4 1 Enter Base number (1)  Enter PIN (0000) then Select handset number from the given list 1..6, FLASH

REMOVING A HANDSET
FLASH 9 PIN (0000) 3 FLASH then choose handset to be removed.

Searching, The handset should automatically link to the base. If B1 H1 is not displayed or "not sub" then Register the handset.

Buzzing sound,  The phone needs more charging.

Handset shows = and buttons do not operate; see Handset lock.